ADEMCO VISTA-32FB Installation And Setup Manual page 158

VISTA-32FB Installation and Set-Up Guide
06 DAYS? MTWTFSS
HIT 0-7
06 Permanent ?
0 = NO,1 = YES 0
24–20
entered in the same manner.
Pressing any key in the 0-9 range while the cursor is under the
AM/PM position toggles the AM/PM indication.
Press [Q] to continue.
To select the days that are to be activated, enter 1-7 (Monday
= 1). An "x" will appear under that day, indicating the output
x x
for that day is active. Entering a day's number again will
deactivate that day. Pressing 0 will toggle all days on/off.
The outputs will only be in effect for the days that have the
letter "x" under them. As the week progresses, the selected
days are reset to the inactive state, unless the permanent
option is selected (next screen prompt).
When completed, press [ ] to continue.
Selecting Permanent (1) means that this schedule will be in
effect on a continuous basis. An answer of 0 means that this
schedule will be in effect for one week only. The letter "x"
under the day will then be cleared, but all other entries for the
output device will remain programmed.
Press [ ] to accept entry.
The system will quit User Scheduling Mode and return to
normal operating mode.