ADEMCO VISTA-32FB Installation And Setup Manual page 47

Compatible Polling Loop Devices (continued)
4275EX
4278EX
4278EX-SN
4101SN
4192SD
4192SDT
4192CP
4192CPM
Vplex PIR
Vplex Quad PIR
Vplex Quad PIR
Vplex Relay Module
Photoelectric Smoke
Detector Devices
Photoelectric Smoke
Detector w/Heat
Detector
Ionization Smoke
Detector
Section 7 – 2-Wire Polling Loop Expansion
•
Dual element PIR with built-in RPM
(connects directly to the polling loop).
•
DIP switch-programmable.
•
Includes mirrors for both wide-angle and
curtain/long-range applications and can
use the 1875PA Pet Alley mirror.
•
Built-in selectable pulse count capability.
•
Quad element PIR with built-in RPM
(connects directly to the polling loop).
•
DIP switch-programmable.
•
Includes mirrors for both wide-angle and
curtain/long-range applications.
•
Features an auxiliary sensor loop that is
nonsupervised and can accept closed
circuit sensors only (cannot be used in UL
installations).
•
Quad element PIR with built-in RPM
(connects directly to the polling loop).
•
DIP switch-programmable.
•
Includes mirrors for both wide-angle and
curtain/long-range applications.
•
Features an auxiliary sensor loop that is
nonsupervised and can accept closed
circuit sensors only (cannot be used in UL
installations).
•
Serial ID number preprogrammed, no
special programmer required.
•
Serial ID number preprogrammed.
•
Form-C relay output; rated 2A, 28V.
•
One 10k EOLR supervised zone input.
•
One-piece photoelectric smoke detector
with built-in RPM.
•
DIP switch-programmable.
•
One-piece photoelectric smoke detector
with 135°F (57°C) heat detector and built-
in RPM.
•
DIP switch-programmable.
•
One-piece products of combustion
ionization detector with built-in RPM.
•
DIP switch-programmable.
•
4192CPM provides maintenance signals.
7–7