Scheduling Menu Structure - ADEMCO VISTA-32FB Installation And Setup Manual

Use #80 Scheduling Menu Mode to perform the following functions:
•
Program the time windows.
•
Program the open/close schedules.
•
Program the time-driven events.
•
Program the access schedules.

Scheduling Menu Structure

To program schedules, enter Scheduling Program Mode:
[Installer Code] + [#] +[80].
This mode can be entered only when all partitions are disarmed.
There are 5 sections of scheduling menus, as shown below. Entering 1 at a displayed main
menu prompt will select that menu section. Prompts for programming that scheduling
feature will then appear. Enter 0 to skip a section and display the next menu option.
Time Window ?
1 Yes
O/C Schedules ?
1 Yes
Holidays ?
1 Yes
Timed Events ?
1 Yes
Access Sched. ?
1 Yes
Quit ?
1 Yes
Upon entering Schedule Menu Mode, this prompt will appear.
Enter 1 to program time windows. Refer to Time Windows
0 = No 0
Programming later in this section for detailed procedures.
Enter 0 to move to the O/C SCHEDULES? prompt.
Enter 1 to program opening and closing schedules. Refer to
Open/Close Schedules Programming later in this section for
0 = No 0
detailed procedures.
Enter 0 to move to the HOLIDAYS? prompt.
Enter 1 to program holiday schedules. Refer to Holiday
Schedule Programming later in this section for detailed
0 = No 0
procedures.
Enter 0 to move to the TIMED EVENTS? prompt.
Enter 1 to program timed events for relay outputs, additional
schedules, and other system functions. Refer to Time-Driven
0 = No 0
Event Programming later in this section for detailed
procedures.
Enter 0 to move to the ACCESS SCHED.? prompt.
Enter 1 to program access schedules. Refer to Limitation of
Access Schedules Programming later in this section for detailed
0 = No 0
procedures.
Enter 0 to move to the QUIT ? prompt.
Enter 1 to quit #80 Scheduling Menu Mode and return to
normal operating mode.
0 = No 0
Enter 0 to make any changes or review the scheduling
programming options. If 0 is pressed, the TIME WINDOW?
prompt is displayed.
Section 24 – Scheduling Options
24–7