ADEMCO VISTA-32FB Installation And Setup Manual page 189

nn DEVICE IS OFF
HIT 0=OFF , 1=ON
nn DEVICE IS OFF
HIT THE KEY
A relay that has been designated as a fire relay is automatically restricted to prevent
inadvertent activation/deactivation by users. Only the Installer Code can override this
restriction. If the installer attempts to access a fire relay, the message RESTRICTED USE
OVERRIDE will be displayed. The relay can then be tested for manual operation.
Voice: "VOICE DESCRIPTOR" DEVICE "NN" ON/OFF. FOR
"VOICE DESCRIPTOR" ON, ENTER 1; FOR "VOICE
DESCRIPTOR" OFF ENTER 0
Press 0 or 1 to turn the device off or on respectively.
'"N" represents the 2-digit relay number and "VOICE
DESCRIPTOR" is the relay voice descriptor programmed by
the installer (see Relay Voice Descriptors in #93 Menu Mode of
the Quick Start Guide).
Voice: "VOICE DESCRIPTOR" DEVICE "NN" ON/OFF. TO
EXIT, ENTER 00 NOW
From a keypad, press [ ] to continue. The ENTER DEVICE
NO. prompt will appear.
From a telephone keypad, enter 00 to exit, or enter the next
relay number to be programmed. The current on/off state of
that relay will be annunciated as described above.
Alternatively, if 6 seconds elapses with no key depression, the
voice module will annunciate the ENTER DEVICE CODE
NOW message.
Section 29 - Keypad Functions
29–7