Section 2 - Planning A Partitioned System; Theory Of Partitioning - ADEMCO VISTA-32FB Installation And Setup Manual

Fire and burglary partitioned security system with scheduling
Table of Contents

Advertisement

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
In This Section

Theory of Partitioning

Setting Up a Partitioned System
Common Lobby Logic
Master Keypad Setup and Operation
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Theory of Partitioning
This system provides the ability to arm and disarm up to 2 different areas, as if each had its
own control. These areas are called partitions. Partitions are used to disarm certain areas
while leaving other areas armed, or to limit access to certain areas to specific individuals.
Each system user can be assigned to operate any or all partitions, and can be given a
different authority level in each.
Before anything can be assigned to those partitions, the number of required partitions (1-2)
must first be determined.
Following are some facts the user should know about partitioning.
Keypads
Each keypad must be given a unique address, and be assigned to one partition. Please note
that it can also be assigned to Partition 3 if Master keypad operation is desired. (See Master
Keypad Setup and Operation later in this section.)
Zones
Each zone must be assigned to one partition.
The zones assigned to a partition will be displayed on that partition's keypad(s).
Fire zones must be assigned to Partition 1.
Users
Each user may be given access to one or more partitions. If a user is to operate more than
one partition and would like to arm/disarm all or some of those partitions with a single
command, the user must be enabled for global arming for those partitions (when entering
user codes).
A user with access to more than one partition (multiple access) can log on to one partition
from another partition's keypad, provided that program field 2 18: Enable GOTO is enabled
for each partition to be logged on to from another.
A partition can be selected as a common lobby partition, and other partitions can affect this
partition by causing arming/disarming of this partition to be automated (see Common Lobby
Logic later in this section).
Planning a Partitioned System
S E C T I O N
2–1
2

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents