ADEMCO VISTA-32FB Installation And Setup Manual page 150

VISTA-32FB Installation and Set-Up Guide
Arm/Disarm Commands
Activation times 1 (Beginning), 2 (End), 3 (During) are the only valid choices for
automatic arming and disarming functions.
During can be used to arm or disarm the control for a specific time only. For example, if
During is selected with Arm-STAY, the system will automatically Arm-STAY at the
beginning of the window and automatically disarm at the end of the window.
•
The auto-arm warning (field 2 06) applies when using time-driven events to auto-arm.
•
Temporary schedules will not override an auto-arming or auto-disarming programmed in time-
driven events.
•
The auto-arming window cannot be extended using the [Installer Code] + #82 Mode.
Bypass Commands
Activation times 1 (Beginning), 2 (End), 3 (During) are the only valid choices for bypass
commands. If 3 (During) is selected for auto-bypassing, the system will bypass the zone(s)
specified on a particular zone list at the beginning of the window and unbypass the
zone(s) at the end of the window. If it is selected for auto unbypassing, the system will
remove the bypass of the zone(s) at the beginning of the window and will restore the
bypass of the zone(s) at the end of the window.
Open/Close Windows
Activation time 3 (During) is the only valid choice for these commands.
24–12
Action Code
20 Arm-STAY
21 Arm-AWAY
22 Disarm
23 Force Arm-STAY (Auto-bypass faulted zns)
24 Force Arm-AWAY (Auto-bypass faulted zns)
Action Code
30 Auto bypass - Zone list
31 Auto unbypass - Zone list
Action Code
40 Enable Opening Window by partition
41 Enable Closing Window by partition
42 Enable Access Window for access group
50 Off-Normal Reminder
(Starts local keypad beeping if fire off-
normal condition exists)
Action Specifier
Partition(s)
Partition(s)
Partition(s)
Partition(s)
Partition(s)
Action Specifier
Zone list #
Zone list #
Action Specifier
Partition(s)
Partition(s)
Access Group
None