ADEMCO VISTA-32FB Installation And Setup Manual page 132

VISTA-32FB Installation and Set-Up Guide
1 48 WIRELESS KEYPAD ASSIGNMENT
Enter the partition in which RF keypad is used, 1-2.
Enter 0 if no RF keypad is used.
1 49 SUPPRESS TX SUPERVISION SOUND
Enter 1 to disable trouble sounding for transmitter check-in failure.
Enter 0 if audible trouble sounding is desired.
Must be 0 for UL.
1 52 SEND CANCEL IF ALARM + OFF (partition-specific)
Enter 1 if Cancel reports are to be sent when the system is disarmed after an alarm,
regardless of how much time has gone by.
Enter 0 if Cancel reports are to be sent within bell timeout period only.
1 53 DISABLE DOWNLOAD CALLBACK
Enter 1 to disable the callback requirement for downloading.
Enter 0 to require a callback.
Must be 0 for commercial fire and UL commercial burglary installations.
1 57 ENABLE 5800 RF BUTTON GLOBAL ARM
Enter 1 to have the system arm/disarm in accordance with the button's user's global
arming settings.
Enter 0 if the button is not to be used to global arm the system (however, home partition
arming will still occur).
1 58 ENABLE 5800 RF BUTTON FORCE ARM
Enter 1 to allow the RF button user to force a bypass of all faulted zones when arming
the system. When attempting to arm the system, the keypad will beep once after
pressing the button if any faulted zones are present. If this feature is enabled, the user
should then press the button again within 4 seconds to force-bypass those zones and
arm the system.
Enter 0 if RF button force bypass is not desired.
1 60 ZONE 5 AUDIO ALARM VERIFICATION
Enter 1 if 2-way audio (AAV) is being used.
Enter 0 if AAV is not being used. Must be 0 for commercial fire and UL.
1 70 EVENT LOG TYPES
Enter 1 for each type of event for which event logging is desired.
Otherwise enter 0. Default is [100010].
1 71 12/24 HOUR TIME STAMP FORMAT
Select the type of time stamping desired:
0=standard 12-hour; 1= 24-hour format.
23–14
Alm Chck Byps O/C Systm Test
[0]
[1]
[0]
[0]
[0]
[0]
[0]
[0]