ADEMCO VISTA-32FB Installation And Setup Manual page 22

VISTA-32FB Installation and Set-Up Guide
Pressing [ ] will cause the following display to appear at Partition 1's keypad(s):
Additional zone faults will be displayed one at a time. To display a new partition's status,
press [ ] + [Partition No.].
The Armed LED on a master keypad will be lit only if all partitions have been armed
successfully. The Ready LED will be lit only if all partitions are ready to arm. Neither LED
will be lit if only some partitions are armed and/or only some partitions are ready.
The sounder on a master keypad will reflect the sound of the most critical condition on all of
the partitions. The priority of the sounds is as follows:
a. Pulsing fire alarm sounds.
b. Steady burglar alarm sounds.
c. Trouble sounds (rapid beeping).
Pressing any key on the master keypad or a keypad on the partition where the condition
exists will silence the sounder.
A master keypad uses the same panics as Partition 1. Master keypad panics are sent to Partition
1, and will activate on Partition 1. Therefore, panics must be programmed for Partition 1.
2–6
FAULT 002 LOADING
DOCK WINDOW