Daily Open/Close Schedules - ADEMCO VISTA-32FB Installation And Setup Manual

Daily Open/Close Schedules

Open/Close Schedule Worksheet
Write in the previously defined time window numbers for open and close for each partition.
Part
1
2
Open/Close Schedule Programming
Each partition can be assigned one daily open/close schedule, plus a holiday open/close
schedule. Temporary schedules are programmed separately, using the #81 Temporary
Schedule Menu Mode. To program additional open/close schedules, see Time-Driven Event
Programming.
After entering Scheduling Menu Mode, press 0 until the O/C SCHEDULES? prompt appears.
O/C Schedules ?
1 Yes
Partition # ?
01-02, 00 = Quit 01
Mon P1 OP WIND.?
00:00 00:00
Mon P1 CL WIND.?
00:00 00:00
Tue P1 OP WIND.?
00:00 00:00
Mon Tues
Op Cl Op Cl
Enter 1 to program opening and closing schedules.
0 = No 0
Enter the appropriate partition number for which the following
open/close schedules will apply.
Enter 00 + [ ] at the PARTITION #? prompt to quit open/close
schedules programming and display the QUIT ? prompt.
Enter the time window number 01-20 for the displayed day's
opening schedule beginning with Monday.
00
Enter 00 if no schedule is desired for a particular day. As the
number is keyed in, the actual time that has been stored for
that window number will be displayed as a programming aid.
Press [ ] to accept the entry.
Enter the time window number for the displayed day's closing
schedule. As the number is keyed in, the actual time that has
00
been stored for the window number will be displayed.
Press the [ ] key to accept the entry.
The keypad will now prompt for Tuesday's open/close schedule,
etc. Follow the procedure for Monday's prompts.
00
When the last day of the week has been programmed, the
holiday opening and closing window prompts are displayed.
Wed Thur
Op Cl Op Cl
Section 24 – Scheduling Options
Fri Sat
Op Cl Op Cl
Sun Hol
Op Cl Op Cl
24–9