Limitation Of Access Schedules - ADEMCO VISTA-32FB Installation And Setup Manual

VISTA-32FB Installation and Set-Up Guide

Limitation of Access Schedules

Limitation of Access is a means by which a user's access code is limited to working during a
certain period of time. The system provides 8 Access Schedules, each of which consists of two
time windows for each day of the week and two time windows for holidays (typically one for
an opening time window and the second for a closing time window). A user required to follow
a schedule would be assigned to an access group of the same number (1-8; i.e., schedule 1=
group 1). The user's access code is assigned to a group when that user is added to the
system. If no limitations apply, enter 0.
Limitation of Access Schedule Worksheet
Enter the appropriate time window numbers for each access schedule.
Acc
Sch
1
2
3...8
Note: The holidays used for the access groups are the same as those defined in the holiday
schedule.
Limitation of Access Schedules Programming
To program access schedules, do the following:
Enter Scheduling Menu Mode [Installer Code] + [#] + [80]. After entering Scheduling
Menu Mode, press 0 until the ACCESS SCHED. ? prompt appears.
Access Sched. ?
1 Yes
ACCESS SCHED # ?
01-08, 00 = Quit 01
MON A1 Window 1?
00:00 00:00
MON A1 Window 2 ?
00:00 00:00
TUE A1 Window 1?
00:00 00:00
24–16
Mon Tues
W1 W2 W1 W2 W1
Enter 1 to program access schedules.
0 = No 0
Enter the access control schedule number between 01 and 08.
Press [ ] to accept entry.
Enter 00 at the ACCESS SCHED #? prompt to quit the access
control menus and display the QUIT ? prompt.
Enter the first time window number (01-20) for this access
schedule for the displayed day. As the number is keyed in, the
00
actual time that has been stored for the window will be
displayed.
Press [ ] to continue.
Enter the second time window number from 01-20 for this
access schedule for the displayed day. As the number is keyed
00
in, the actual time that has been stored for the window will be
displayed.
Press [ ] to continue.
Repeat the procedure for the other days of the week. When the
last day of the week has been programmed, the windows for
00
holidays may be entered.
Wed Thurs
W2 W1 W2 W1
Fri Sat Sun
W2 W1 W2 W1
Hol
W2 W1 W2