Section 17 - Event Log Options; General Information; Event Log Printer Connections - ADEMCO VISTA-32FB Installation And Setup Manual

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
In This Section

General Information

Event Log Printer Connections

Programming Event Log Options
Event Logging Procedures
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
General Information
This system has the ability to record up to 224 events of various types in a history log. Each
event is recorded in one of six categories with the time and date of its occurrence (if real-time
clock is set). These categories are:
• Alarm.
• Supervisory/check.
• Bypass.
• Open/close.
• System conditions.
• Test.
The log may be viewed (Display Mode) on an alpha keypad, or can be printed (Print Mode) on
a serial printer (connected to the system via a 4100SM Serial Interface Module).
Event Log Printer Connections
The VISTA-32FBs event log can be printed on a local serial printer. If used, program field
3 19 must be set to 1.
This setting overrides the functions selected for INPUT 1 and OUT 2 made in field 3 20.
Connect a UL EDP Listed serial printer to the J2 connector using an ADEMCO 4100SM
Interface Module as shown in Figure 17-1.
S E C T I O N
Event Log Options
1 7
17–1