ADEMCO VISTA-32FB Installation And Setup Manual page 153

Action Codes:
50=Off-normal Reminder
01 Time Window ?
00:00 00:00 01
01 Active time ?
0
Days ? MTWTFSSH
Hit 0-8 x x
Quit ?
1 = YES 0 = NO 0
Action 50
No action specifier is required for this
action as the conditions for which this
will occur are system-wide.
Enter the time window number (01-20) for which this timed event
is to occur. As the number is keyed in, the actual time that has
been stored for the time window number will be displayed.
Press [ ] to accept entry.
Enter the activation time from 1-4 (listed below). As the number
is keyed in, the activation time will be displayed. The choices are:
1: Trigger at the start of the window.
2: Trigger at the end of the window.
3: Take effect only for the duration of the window.
4: Trigger at both the start and the end of the window.
Example: coffee break buzzer.
Press [ ] to accept entry.
The system will then ask for which days the event is to be
activated.
Press 0 to toggle all days on or off; or else press keys 1-8 to toggle
the letter "x" under the day on or off (Monday = 1, holiday = (H)
or 8).
When all entries have been made, the TIMED EVENT #? prompt
is displayed again.
Repeat the procedure for each timed event required for the
installation.
Enter 0 at the QUIT ? prompt to return to the main menu choices
and continue programming. Enter 1 to quit Scheduling Menu
Mode.
Section 24 – Scheduling Options
Action Specifier:
24–15