Summary Of Programming Commands - ADEMCO VISTA-50P Quick Start Manual

1 * 7 5
RELAY TIMEOUT YY SECONDS [000]
Enter the relay timeout, 0-127 seconds, desired for #80 Menu
Mode time driven event relay command numbers "05/10" and
#93 Menu Mode Relay Programming command "57".
1 * 7 6
ACCESS CONTROL RELAY FOR PART.
Relay will be pulsed for 2 seconds whenever code + [0] is
pressed. Enter 00-16; 00=none
3rd Page Programming Fields
2 * 0 0
NUMBER OF PARTITIONS
Enter 1-8
2 * 0 1
DAYLIGHT SAVINGS TIME [04, 10]
START/END MONTH
00-12; if no daylight savings time, enter 00,00
2*02
DAYLIGHT SAVINGS TIME
START/END WEEKEND #
Enter 1-7. 1=first; 2=second; 3=third; 4=fourth; 5=last; 6=next
to last; 7=3rd from last [1,5; 1st Sunday in April, last in Oct.]
2 * 0 5
AUTO-ARM DELAY
Enter the time between the end of the arming window and the
start of auto-arming warning period, in values of 1-14 times 4
minutes 00=instant; [15=no auto arm at all]. When this delay
expires, the Auto-Arm Warrning Period begins.
2 * 0 6
AUTO-ARM WARNING PERIOD
This is the time during which the user is warned to exit the
premises prior to the auto-arming of the system (beeps every
15 seconds; "ALERT" displayed). Enter 01-15 minutes.
00=instant at end of arming delay .
2 * 0 7
AUTO-DISARM DELAY
This is the time between the end of the disarming window and
auto-disarming. Enter 01-14 times 4 minutes; 00=instant at
end of window; 15=no auto-disarm.
2 * 0 8
ENABLE FORCE ARM FOR AUTO-ARM
0=disable; 1=enable
2 * 0 9
OPEN/CLOSE REPORTS BY EXCEPTION
1=enable; 0=disable; If enabled, only openings and closings
occurring outside the scheduled opening /
closing windows will trigger dialer reports. Opening reports
will also be suppressed during the closing window.,
2 * 1 0
ALLOW DISARMING ONLY DURING
ARMING/DISARMING WINDOWS
See system-wide field 2*11 if enabling field 2*10. This feature
adds high security to the installation.
0=disable; 1=enable
2 * 1 1
ALLOW DISARM OUTSIDE WINDOW
IF ALARM OCCURS
Used only if field 2*10 (partition-specific field) is set to "1". If
this field is enabled ("1") the system can be disarmed outside
the disarm window if an alarm has occurred. If "0", disarming
can only be done during the disarm window. If field 2*10 is set
to "0" for a partition, this field has no effect for that partition.
SCHEDULING RELATED DIALER REPORTS
| |
2 * 1 3
1st Digit
[0] |
press *94)
[1]
| |
Start End
[1, 5] |
Start | End
2 * 1 8
2 * 1 9
[15] |
2 * 2 0
[00] |
2 * 2 1
[15] |

SUMMARY OF PROGRAMMING COMMANDS

[0]
• To enter program mode, enter installer code +
[0]
• To set standard defaults, press *97
• To set communication defaults, press *94 +
[0]
• To change to next page of program fields,
• To return to previous set of fields, press *99
• To erase account & phone number field
[0]
• To assign zone descriptors, press #93 +
• To add custom words, press #93 + follow menu
• To enter Installer's Message, press #93 +
• To exit program mode, press *99 OR *98: *99
2 * 1 4
2nd Digit
| | Early opening report code
| | Early closing report code
| | Late opening report code
| | Late closing report code
| | No opening (late to open) report code
| | No closing (late to close) report code
| | Auto-arm failure report code
| | Access schedule changed report code
ENABLE GOTO FOR THIS PARTITION
1=enable; 0=disable
USE PARTITION DESCRIPTORS
0=disable; 1=enable
ENABLE J7 TRIGGERS by PARTITION
0=disable for displayed partition; 1=enable for displayed
partition
ENABLE SUPERVISION PULSES FOR LRR
TRIGGER OUTPUTS
Used for supervised connection to 7920SE.
Enter 0 to disable or 1 to enable the listed outputs.
F= Fire; B= Burglary; S= Silent panic/duress
[8] + [0] + [0]
one of the following: *80=low speed; *81=Ademco
Express; *82=Ademco High Speed; *83=Ademco's
Contact ID
press *94
entries, press [*] + field number + [*]
follow menu prompts
prompts
follow menu prompts
allows re-access to programming mode by installer
code. *98 prevents re-access to programming
mode by installer code.
[0]
[0]
[1]
[000] | |
F B S
– 11 –