Section 24 - Scheduling Options; Introduction To Scheduling - ADEMCO VISTA-32FB Installation And Setup Manual

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
In This Section

Introduction to Scheduling

Time Window Definitions
Open/Close Definitions
Scheduling Menu Mode
Scheduling Menu Structure
Time Windows
Daily Open/Close Schedules
Holiday Schedules
Time-Driven Events
Limitation of Access Schedules
Temporary Schedules
User Schedule Menu Mode
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
Introduction to Scheduling
This section describes the scheduling features provided with this control panel.
•
U L
Bypass and Auto-Arm Fail reports must be programmed for UL installations.
•
Auto-disarming is not for use in UL installations.
General
•
The scheduling features allow certain operations to be automated, such as auto-arming,
auto-disarming, auto-bypassing and unbypassing of zones, and activating relay outputs
(using 4204 modules).
•
The system uses time windows (a programmed period of time with a start and stop time)
for defining open/close schedules, holiday schedules, user-defined temporary schedules
and access schedules for users.
•
Scheduled events are programmed by user-friendly menu modes of programming (#80,
#81, and #83 modes), explained in detail in this section. These menus proceed step by
step through the options.
Auto Arming
•
The system can automatically arm (AWAY Mode) a partition at the end of a pre-
determined closing (arming) time window.
Scheduling Options
S E C T I O N 2 4
24–1