ADEMCO VISTA-32FB Installation And Setup Manual page 152

VISTA-32FB Installation and Set-Up Guide
01 ACTION ?
none
Action Codes:
01=Relay On
02=Relay Off
03=Relay Close for 2 seconds
04=Relay Close XX minutes
05=Relay Close YY seconds
Action Codes:
06=Relay Group On
07=Relay Group Off
08=Relay Group Close for 2
seconds
09=Relay Group Close XX minutes
10=Relay Group Close YY seconds
Action Codes:
20=Arm-STAY
21=Arm AWAY
22=Disarm
23=Force Arm STAY
24=Force Arm AWAY
40=Enable Open Window by part.
41=Enable Close Window by part.
Action Codes:
30=Auto bypass - Zone list
31=Auto unbypass - Zone list
Action Codes:
42=Enable Access Window for
Access group(s)
24–14
Enter the action code for this timed-event number from the list at
the left. This could be an output command, an arming command,
00
or any other time-driven event.
Press [ ] to accept the entry. The prompt for the action specifier
will display.
Actions 01-05
If actions 01-05 were selected, the
prompt at the right will be displayed.
Enter the relay number.
Press [ ] to accept entry. The TIME
WINDOW ? prompt appears.
Actions 06-10
If actions 06-10 were selected, the
prompt at the right will be displayed.
Enter the relay group number.
Press [ ] to accept entry. The TIME
WINDOW ? prompt appears.
Actions 20-24 and 40-41
If actions 20-24 or 40-41 were selected,
the prompt at the right will be
displayed. Enter the partition to
which the action applies. Enter 0 to
select all partitions. Enter a partition
number again to deselect it.
Press [ ] to accept entry. The TIME
WINDOW ? prompt appears.
Actions 30-31
If actions 30-31 were selected, the
prompt at the right will be displayed.
Enter the zone list number that
contains the zones to be bypassed or
unbypassed.
Press [ ] to accept entry. The TIME
WINDOW ? prompt appears.
Action 42
If action 42 was selected, the prompt
at the right will be displayed. Enter
the group number to which the time
window will apply.
Press [ ] to accept entry. The TIME
WINDOW ? prompt appears.
Action Specifier:
01 RELAY # ?
00
Action Specifier:
01 RELAY GRP # ?
00
Action Specifier:
PART? 1 2
HIT 0-2 X X
Action Specifier:
01 ZONE LIST ?
ENTER 1-8 1
Action Specifier:
GROUP ? 12345678
HIT 0-8 X