Section 28 - User Access Codes; General Information; User Codes And Levels Of Authority - ADEMCO VISTA-32FB Installation And Setup Manual

• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
In This Section

General Information

User Codes and Levels of Authority

To Add a Master, Manager, or Operator Code
To Change a Master, Manager, or Operator Code
To Add an RF Key to an Existing User
To Delete a Master, Manager, or Operator Code
To Exit the User Edit Mode
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
General Information
This system allows a total of 75 security access codes to be allocated, each identified by a
user ID number. Regardless of the number of partitions each code has access to, it
occupies only one user slot in the system. If a particular code is not used in all
partitions, that user ID number cannot be used again.
The Quick Arm feature can also be programmed (partition-specific program field
allows the [#] key to be pressed instead of entering the security code when arming the
system. The security code must always be entered to disarm the system.
A user code other than the installer code must be programmed for the Quick Arm feature to
function.
User Codes and Levels of Authority
Each user of the system can be assigned a level of authority, which tells the system what
system functions that user is authorized to do. A user can have different levels of authority
within different partitions. In general, users can perform most system functions, including
Test and Chime Modes, but certain authority levels restrict disarming, bypassing or the
assigning of other user codes. These restrictions are noted in the descriptions below.
Use the View Capabilities keypad function to view the partitions and authority levels for
which a particular user is authorized. These levels are described in the table below in order
from highest to lowest ranking.
S E C T I O N
User Access Codes
2 8
29), which
28–1