Banner Configure Ip-Lan - Planet SGSD-1022 User Manual

boundaries. The use of underscores ( _ ) or other unobtrusive non-letter characters is suggested for situations where
whitespace is necessary for clarity.
Example
Console(config)# banner configure equipment-location 710_Network_Path,_Indianapolis
Console(config)#

banner configure ip-lan

This command is used to configure the device IP address and subnet mask information displayed in the banner. Use the no
form to restore the default setting.
Syntax
banner configure ip-lan ip-mask no banner configure ip-lan ip-mask
-The IP address and subnet mask of the device.
(Maximum length: 32 characters)
Default Setting
None
Command Mode
Global Configuration
Command Usage
Inpu strings cannot contain spaces. The banner configure ip-lan command interprets spaces as data input boundaries.
The use of underscores ( _ ) or other unobtrusive non-letter characters is suggested for situations where whitespace is
necessary for clarity.
Example
Console(config)# banner configure ip-lan 192.168.1.1/255.255.255.0
Console(config)#
banner configure lp-number
This command is used to configure the LP number information displayed in the banner. Use the no form to restore the default
setting.
Syntax
banner configure lp-number lp-num no banner configure lp-number
lp-num - The LP number. (Maximum length: 32 characters)
User's Manual of SGSD-1022 / SGSD-1022P
361
SGSW-2840 / SGSW-2840P