Planet SGSD-1022 User Manual page 33

10/100/1000Base-T interfaces (Port-9 and Port-10) and SFP interfaces
LED Color
1000
Green
LNK/ACT
10/100
Orange
LNK/ACT
SGSW-2840 / SGSW-2840R LED indication
System
LED Color
PWR Green
10/100Base-TX interfaces (Port-1 to Por-24)
LED Color
LNK/ACT Green
100 Orange
10/100/1000Base-T interfaces (Port-25 to Port-28) and SFP interfaces
Lights: To indicate the link through that port is successfully established with speed
1000Mbps
Blink: To indicate that the switch is actively sending or receiving data over that port.
Off: If L10/100 NK/ACT LED light-> indicate that the port is operating at 10Mbps or
100Mbps
If LNK/ACT LED Off -> indicate that the port is link down
Lights: To indicate the link through that port is successfully established with speed
10Mbps or 100Mbps
Blink: To indicate that the switch is actively sending or receiving data over that port.
Off: If 1000 LNK/ACT LED light-> indicate that the port is operating at 1000Mbps
If 1000 LNK/ACT LED Off -> indicate that the port is link down
Figure 2-7 SGSW-2840 LED panel
Lights to indicate that the Switch is powered on.
Blink to indicate the System is running under booting procedure.
Lights: To indicate the link through that port is successfully established.
Blink: To indicate that the switch is actively sending or receiving data over that port.
Lights: indicate that the port is operating at 100Mbps.
Off: If LNK/ACT LED light-> indicate that the port is operating at 10Mbps
If LNK/ACT LED Off -> indicate that the port is link down
User's Manual of SGSD-1022 / SGSD-1022P
Function
Function
Function
33
SGSW-2840 / SGSW-2840P