Switchport Gvrp - Planet SGSD-1022 User Manual

Global GVRP Status:
GMRP:
Console#

switchport gvrp

This command enables GVRP for a port. Use the no form to disable it.
Syntax
[no] switchport gvrp
Default Setting
Disabled
Command Mode
Interface Configuration (Ethernet, Port Channel)
Example
Console(config)#interface ethernet 1/6
Console(config-if)#switchport gvrp
Console(config-if)#
show gvrp configuration
This command shows if GVRP is enabled.
Syntax
show gvrp configuration [interface] interface
• ethernet unit/port -unit - Stack unit. (Range: 1) -port - Port number. (Range: 1-28)
• port-channel channel-id (Range: 1-12)
Default Setting
Shows both global and interface-specific configuration.
Command Mode
Normal Exec, Privileged Exec
Example
Console#show gvrp configuration ethernet 1/6
Eth 1/ 6:
Disabled
Disabled
564
User's Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P