Revision - Planet SGSD-1022 User Manual

Command Mode
MST Configuration
Command Usage
The MST region name and revision number (page 4-210) are used to designate a unique MST region. A bridge (i.e.,
spanning-tree compliant device such as this switch) can only belong to one MST region. And all bridges in the same
region must be configured with the same MST instances.
Example
Console(config-mstp)#name R&D
Console(config-mstp)#
Related Commands

revision

revision
This command configures the revision number for this multiple spanning tree configuration of this switch. Use the no form to
restore the default.
Syntax
revision number number -Revision number of the spanning tree. (Range: 0-65535)
Default Setting
0
Command Mode
MST Configuration
Command Usage
The MST region name (page 4-209) and revision number are used to designate a unique MST region. A bridge (i.e.,
spanning-tree compliant device such as this switch) can only belong to one MST region. And all bridges in the same
region must be configured with the same MST instances.
Example
Console(config-mstp)#revision 1
Console(config-mstp)#
Related Commands
name
User's Manual of SGSD-1022 / SGSD-1022P
550
SGSW-2840 / SGSW-2840P