Supported
System Capabilities
Enabled
Management Address
ID Basis
Chassis component
Interface alias
Port component
MAC address
Network address
Interface name
Locally assigned
ID Basis
Other
Repeater
Bridge
WLAN Access Point
Router
Telephone
DOCSIS cable device
End Station Only
Interface Settings
The attributes listed below apply to both port and trunk interface types. When a trunk is listed, the descriptions apply to the first
port of the trunk.
The primary function(s) of the system which are currently enabled. Refer to the
preceding table.
The management address protocol packet includes the IPv4 address of the
switch. If no management address is available, the address should be the MAC
address for the CPU or for the port sending this advertisement.
Reference
EntPhysicalAlias when entPhysClass has a value of
'chassis(3)' (IETF RFC 2737)
IfAlias (IETF RFC 2863)
EntPhysicalAlias when entPhysicalClass has a value
'port(10)' or 'backplane(4)' (IETF RFC 2737)
MAC address (IEEE Std 802-2001)
networkAddress
ifName (IETF RFC 2863)
locally assigned
Table 4-2-1 Chassis ID Subtype
Reference
—
IETF RFC 2108
IETF RFC 2674
IEEE 802.11 MIB
IETF RFC 1812
IETF RFC 2011
IETF RFC 2669 and IETF RFC 2670
IETF RFC 2011
Table 4-2-2 System Capabilities
90
User's Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P