Https Setting - Planet SGSD-1022 User Manual

The page includes the following fields:
Object
Authorization Type
Method List
Group List
Interface

4.11.6 HTTPS Setting

You can configure the switch to enable the Secure Hypertext Transfer Protocol (HTTPS) over the Secure Socket Layer (SSL),
providing secure access (i.e., an encrypted connection) to the switch's web interface.
Command Usage
Both the HTTP and HTTPS service can be enabled independently on the switch. However, you cannot configure both
services to use the same UDP port. (HTTP can only be configured through the CLI using the ip http secure-server
command described on page 4-106.)
If you enable HTTPS, you must indicate this in the URL that you specify in your browser: https://device[:port_number]
When you start HTTPS, the connection is established in this way:
-The client authenticates the server using the server's digital certificate.
-The client and server negotiate a set of security protocols to use for the connection.
-The client and server generate session keys for encrypting and decrypting data.
The client and server establish a secure encrypted connection. A padlock icon should appear in the status bar for Internet
Explorer 5.x or above, Netscape 6.2 or above, and Mozilla Firefox 2.0.0.0 or above.
The following web browsers and operating systems currently support HTTPS:
Web Browser
Internet Explorer 5.0 or later
Netscape 6.2 or later
Mozilla Firefox 2.0.0.0 or later
To specify a secure-site certificate, see
Description
Displays the authorization service.
Displays the user-defined or default authorization method.
Displays the authorization server group.
Displays the console or Telnet interface to which the authorization method
applies. (This field is null if the authorization method and associated server group
have not been assigned.)
Operating System
Windows 98,Windows NT (with service pack 6a), Windows 2000,
Windows XP
Windows 98,Windows NT (with service pack 6a), Windows 2000,
Windows XP, Solaris 2.6
Windows 2000, Windows XP, Linux
Table 4-11-1 HTTPS System Support
"Replacing the Default Secure-site
271
User's Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
Certificate".