Snmpv3 Users - Planet SGSD-1022 User Manual

4.3.3.3 SNMPv3 Users

Each SNMPv3 user is defined by a unique name. Users must be configured with a specific security level and assigned to a
group. The SNMPv3 group restricts users to a specific read, write, and notify view.
The page includes the following fields:
Object
User Name
Group Name
Model
Level
Authentication
Authentication
Password
Privacy Protocol
Privacy Password
Actions
Figure 4-3-6 SNMPv3 Users page screenshot
Description
The name of user connecting to the SNMP agent.
(Range: 1-32 characters)
The name of the SNMP group to which the user is assigned.
(Range: 1-32 characters)
The user security model; SNMP v1, v2c or v3.
The security level used for the user:
-noAuthNoPriv There is no authentication or encryption used in SNMP
communications.
(This is the default for SNMPv3.)
-AuthNoPriv SNMP communications use authentication, but the data is not
encrypted (only available for the SNMPv3 security model).
-AuthPriv SNMP communications use both authentication and
encryption (only available for the SNMPv3 security model).
The method used for user authentication.
Options: MD5, SHA
Default: MD5
A minimum of eight plain text characters is required.
The encryption algorithm use for data privacy; only 56-bit DES is currently
available.
A minimum of eight plain text characters is required.
Enables the user to be assigned to another SNMPv3 group.
103
User's Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P