4.11.11.1 Web Authentication Configuration
Web authentication is configured on a per-port basis, however there are four configurable parameters that apply globally to all
ports on the Managed Switch.
1.
Click Security, Web Authentication, Configuration.
2.
Set the required global parameters, and click Apply.
The page includes the following fields:
Object
System Authentication
Control
Session Timeout
Quiet Period
Login Attempts
Figure 4-11-26 Settings screenshot
Description
Enables Web Authentication for the switch.
(Default: Disabled)
Configures how long an authenticated session stays active before it must be
re-authenticated.
Range: 300-3600 seconds;
Default: 3600 seconds
Configures how long a host must wait to attempt authentication again after it has
exceeded the maximum allowable failed login attempts.
Range: 1-180 seconds;
Default: 60 seconds
Configures the number of times a supplicant may attempt and fail authentication
before it must wait the configured quiet period.
Range: 1-3 attempts;
Default: 3 attempts
297
User's Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P