4.5.5.1 LACP Configuration
Select any of the switch ports from the list and click Add or Remove.
1.
Click Port, LACP, Configuration.
2.
Select any of the switch ports from the scroll-down port list and click Add.
3.
After you have completed adding ports to the member list, click Apply.
The page includes the following fields:
Object
Member List
New
Port
Figure 4-5-11 LACP Configuration page screenshot
Description
Shows configured trunks (Trunk ID, Unit, Port).
Includes entry fields for creating new trunks.
Port identifier.
(SGSD-1022 / SGSD-1022P Range: 1-10)
(SGSW-2840 / SGSW-2840P Range: 1-28)
137
User's Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P