Web Browser
Internet Explorer 5.0 or later
Netscape 6.2 or later
Mozilla Firefox 2.0.0.0 or later
Example
Console(config)# ip http secure-server
Console(config)#
Related Commands
ip http secure-port
copy tftp https-certificate
ip http secure-port
This command specifies the UDP port number used for HTTPS/SSL connection to the switch's web interface. Use the no form to
restore the default port.
Syntax
ip http secure-port port_number no ip http secure-port
port_number – The UDP port used for HTTPS/SSL.
(Range: 1-65535)
Default Setting
443
Command Mode
Global Configuration
Command Usage
You cannot configure the HTTP and HTTPS servers to use the same port.
If you change the HTTPS port number, clients attempting to connect to the HTTPS server must specify the port number in
the URL, in this format:
https://device:port_number
Example
Operating System
Windows 98,Windows NT (with service pack 6a),
Windows 2000, Windows XP
Windows 98,Windows NT (with service pack 6a),
Windows 2000, Windows XP, Solaris 2.6
Windows 2000, Windows XP, Linux
Table 5-34 HTTPS System Support
447
User's Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P