Advertisement
5. Configure IP Address
The WGSW Managed Switch is shipped with default IP address as following.
IP Address: 192.168.0.100
Subnet Mask: 255.255.255.0
To check the current IP address or modify a new IP address for the Managed
Switch, please use the procedures as follow:
Show the current IP address
1. On "Switch#" prompt, enter "show network".
2. The screen displays the current IP address, Subnet Mask and Gateway. As show
in Figure 5-1.
Configure IP address
3. On "Switch#" prompt, type "configuration" to enter into global configuration
mode.
4. On "Switch(Config)#" prompt, enter the following command and press
<Enter>. As show in Figure 5-2.
Switch(Config)# network parms 192.168.1.100
255.255.255.0 192.168.1.1
Figure 5-1: Show IP Information Screen
7
Advertisement
