Rcommand - Planet SGSD-1022 User Manual

cluster.
Syntax
cluster member mac-address mac-address id member-id no cluster member id member-id
mac-address - The MAC address of the Candidate switch.
member-id - The ID number to assign to the Member switch. (Range: 1-36)
Default Setting
No Members
Command Mode
Global Configuration
Command Usage
The maximum number of cluster Members is 36.
The maximum number of switch Candidates is 100.
Example
Console(config)#cluster member mac-address 00-12-34-56-78-9a id 5
Console(config)#

rcommand

This command provides access to a cluster Member CLI for configuration.
Syntax
rcommand id member-id member-id - The ID number of the Member switch. (Range: 1-36)
Command Mode
Privileged Exec
Command Usage
This command only operates through a Telnet connection to the Commander switch. Managing cluster Members using
the local console CLI on the Commander is not supported.
There is no need to enter the username and password for access to the Member switch CLI.
Example
Vty-0#rcommand id 1
CLI session with the 24/48 L2/L4 GE Switch is opened.
To end the CLI session, enter [Exit].
Vty-0#
show cluster
This command shows the switch clustering configuration.
User's Manual of SGSD-1022 / SGSD-1022P
406
SGSW-2840 / SGSW-2840P