Planet SGSD-1022 User Manual page 69

Password Threshold
Silent Time
Data Bits
Parity
Speed
Stop Bits
Range: 0-65535 seconds;
Default: 600 seconds
Sets the password intrusion threshold, which limits the number of failed logon
attempts. When the logon attempt threshold is reached, the system interface
becomes silent for a specified amount of time (set by the Silent Time parameter)
before allowing the next logon attempt.
Range: 0-120;
Default: 3 attempts
Sets the amount of time the management console is inaccessible after the
number of unsuccessful logon attempts has been exceeded.
Range: 0-65535;
Default: 0
Sets the number of data bits per character that are interpreted and generated by
the console port. If parity is being generated, specify 7 data bits per character. If
no parity is required, specify 8 data bits per character.
Default: 8 bits
Defines the generation of a parity bit. Communication protocols provided by
some terminals can require a specific parity bit setting. Specify Even, Odd, or
None.
Default: None
Sets the terminal line's baud rate for transmit (to terminal) and receive (from
terminal). Set the speed to match the baud rate of the device connected to the
serial port.
Range: 9600, 19200, or 38400 baud;
Default: 9600 bps
Sets the number of the stop bits transmitted per byte.
Range: 1-2;
Default: 1 stop bit
69
User's Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P