Telnet Server Commands - Planet SGSD-1022 User Manual

Console(config)# ip http secure-port 1000
Console(config)#
Related Commands
ip http secure-server

5.12.7 Telnet Server Commands

Command
ip telnet server
ip telnet server
This command allows this device to be monitored or configured from Telnet. It also specifies the TCP port number used by the
Telnet interface. Use the no form without the "port" keyword to disable this function. Use the no from with the "port" keyword to
use the default port.
Syntax
ip telnet server [port port-number]
no telnet server [port]
port -The TCP port used by the Telnet interface.
port-number -The TCP port number to be used by the browser interface. (Range: 1-65535)
Default Setting
Server: Enabled
Server Port: 23
Command Mode
Global Configuration
Example
Console(config)#ip telnet server
Console(config)#ip telnet port 123
Function
Allows the switch to be monitored or configured from Telnet;
alsospecifies the port to be used by the Telnet interface
Table 5-35 Telnet Server Commands
448
User's Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
Mode
GC