Telnet Ip Filter - Planet SGSD-1022 User Manual

Object
SNMP IP Filter
Start IP Address
End IP Address
Add/Remove Filtering
Entry

4.11.14.3 Telnet IP Filter

You can create IP address groups that are allowed management access to the Managed Switch through telnet.
1. Click Security, IP Filter.
2. Enter the IP addresses or range of addresses that are allowed management access to an interface, and click Add Telnet
IP Filtering Entry to update the filter list.
The page includes the following fields:
Object
Telnet IP Filter
Start IP Address
Description
Configures IP address(es) for the SNMP group.
A single IP address, or the starting address of a range.
The end address of a range.
Adds/removes an IP address from the list.
Figure 4-11-44 Telnet IP Filter page screenshot
Description
Configures IP address(es) for the Telnet group.
A single IP address, or the starting address of a range.
318
User's Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P