Event Logging Commands - Planet SGSD-1022 User Manual

Password Threshold: 3 times
Interactive Timeout: 65535 sec
Login Timeout: Disabled
Silent Time:
Baudrate:
Databits:
Parity:
Stopbits:
VTY Configuration:
Password Threshold: 3 times
Interactive Timeout: 300 sec
Login Timeout: 1 sec
console#

5.7 Event Logging Commands

This section describes commands used to configure event logging on the switch.
Command
logging on
logging history
logging host
logging facility
logging trap
clear log
logging on
This command controls logging of error messages, sending debug or error messages to switch memory. The no form disables
the logging process.
Syntax
[no] logging on
Disabled
9600
8
None
1
Function
Controls logging of error messages
Limits syslog messages saved to switch memory based on
severity
Adds a syslog server host IP address that will receive logging
messages
Sets the facility type for remote logging of syslog messages
Limits syslog messages saved to a remote server based on
severity
Clears messages from the logging buffer
Table 5-14 Event Logging Commands
User's Manual of SGSD-1022 / SGSD-1022P
388
SGSW-2840 / SGSW-2840P
Mode
GC
GC
GC
GC
GC
PE