Vlan Static List - Planet SGSD-1022 User Manual

4.8.1.4 VLAN Static List

Creating VLANs
Use the VLAN Static List to create or remove VLAN groups. To propagate information about VLAN groups used on this
Managed Switch to external network devices, you must specify a VLAN ID for each of these groups.
The page includes the following fields:
Object
Current
New
VLAN ID
VLAN Name
Status
Add
Remove
Figure 4-8-4 VLAN Static List page screenshot
Description
Lists all the current VLAN groups created for this system.
Up to 255 VLAN groups can be defined.
VLAN 1 is the default untagged VLAN.
VLAN 4093 is reserved for switch clustering and is not user-configurable or
removable.
Allows you to specify the name and numeric identifier for a new VLAN group.
(The VLAN name is only used for management on this system; it is not added to
the VLAN tag.)
ID of configured VLAN (1-4094, no leading zeroes).
Name of the VLAN (1 to 32 characters, no spaces).
Enables or disables the specified VLAN.
- Enabled: VLAN is operational.
- Disabled: VLAN is suspended; i.e., does not pass packets.
Adds a new VLAN group to the current list.
Removes a VLAN group from the current list.
If any port is assigned to this group as untagged, it will be reassigned to VLAN
group 1 as untagged.
180
User's Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P