Whichboot - Planet SGSD-1022 User Manual

--------------------------------------------------------------------------
Console#

whichboot

This command displays which files were booted when the system powered up.
Command Mode
Privileged Exec
Example
This example shows the information displayed by the whichboot command. See the table under the dir command for a
description of the file information displayed by this command.
Console#whichboot
-------------------------------- -------------- ------- ----------
Unit1:
SGSD-1022_DIAG_V0011.bix
SGSD-1022_RUNTIME_V0035_m.bix
startup1.cfg
Console#
boot system
This command specifies the image used to start up the system.
Syntax
boot system {boot-rom| config | opcode}: filename
The type of file or image to set as a default includes:
boot-rom* - Boot ROM.
config* - Configuration file.
opcode* - Run-time operation code.
filename -Name of the configuration file or code image.
* The colon (:) is required.
Default Setting
None
Total free space: 3276800
File name File type Startup Size (byte) -> align?
User's Manual of SGSD-1022 / SGSD-1022P
Boot-Rom
Y 305424
Image
Operation
Y 3018936
Code
Config
Y 4648
File
378
SGSW-2840 / SGSW-2840P