Address Table - Planet SGSD-1022 User Manual

4.6 Address Table

Switches store the addresses for all known devices. This information is used to pass traffic directly between the inbound and
outbound ports. All the addresses learned by monitoring traffic are stored in the dynamic address table. You can also manually
configure static addresses that are bound to a specific port.
4.6.1 Static Addresses
A static address can be assigned to a specific interface on this Managed Switch. Static addresses are bound to the assigned
interface and will not be moved. When a static address is seen on another interface, the address will be ignored and will not be
written to the address table.
Command Sequence - Specify the interface, the MAC address and VLAN, then click Add Static Address.
1. Click Address Table, Static Addresses.
2. Specify the interface, the MAC address and VLAN, then click Add Static Address.
The page includes the following fields:
Object
Static Address Counts
Current Static Address
Figure 4-6-1 Static Addresses page screenshot
Description
The number of manually configured addresses.
Lists all the static addresses.
145
User's Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P