Show Mac Access-Group - Planet SGSD-1022 User Manual

Command Mode
Interface Configuration (Ethernet)
Command Usage
A port can only be bound to one ACL.
If a port is already bound to an ACL and you bind it to a different ACL, the switch will replace the old binding with the new
one.
Example
Console(config)#interface ethernet 1/2
Console(config-if)#mac access-group jerry in
Console(config-if)#
Related Commands
show mac access-list

show mac access-group

This command shows the ports assigned to MAC ACLs.
Command Mode
Privileged Exec
Example
Console#show mac access-group
Interface ethernet 1/5
MAC access-list M5 in
Console#
Related Commands
mac access-group
map access-list mac
This command sets the output queue for packets matching an ACL rule. The specified CoS value is only used to map the
matching packet to an output queue; it is not written to the packet itself. Use the no form to remove the CoS mapping.
Syntax
User's Manual of SGSD-1022 / SGSD-1022P
508
SGSW-2840 / SGSW-2840P