Planet SGSD-1022 User Manual page 114

The page includes the following fields:
Object
Name
Type
Admin Status
Oper Status
Speed Duplex Status
Flow Control Status
Autonegotiation
Trunk Member
Creation
In some situation, when the Managed Switch port is set to "Auto-negotiation" mode and
the link partner (ex. PC or another switch) is force set to "100Full", the speed duplex status
shows "100Half" since the Managed Switch is fail to negotiation with the link partner.
Description
Interface label.
Indicates the port type. The possible type such as:
- 100BASE-TX
- 1000BASE-T
- 1000BASE-SFP
Shows if the interface is enabled or disabled.
Indicates if the link is Up or Down.
Shows the current speed and duplex mode. (Auto, or fixed choice)
Indicates the type of flow control currently in use.
- IEEE 802.3x
- Back-Pressure
- None
Shows if auto-negotiation is enabled or disabled.
Shows if port is a trunk member.
Shows if a trunk is manually configured or dynamically set via LACP.
(Trunk Information only.)
114
User's Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P