Show Log - Planet SGSD-1022 User Manual

Table 4-17 show logging trap - display description
Field
Syslog logging
REMOTELOG status
REMOTELOG facility type
REMOTELOG level type
REMOTELOG server IP
address
Related Commands
show logging sendmail

show log

This command displays the system and event messages stored in memory.
Syntax
show log {flash | ram} [login]
flash - Event history stored in flash memory (i.e., permanent memory).
ram - Event history stored in temporary RAM (i.e., memory flushed on power reset).
login - Shows the login record only.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
This command shows the system and event messages stored in memory, including the time stamp, message level (page
4-50), program module, function, and event number.
Example
The following example shows sample messages stored in RAM.
Console#show log ram
[1] 00:00:38 2001-01-01
"Unit 1, Port 1 link-up notification."
level: 6, module: 5, function: 1, and event no.: 1
Description
Shows if system logging has been enabled via the logging on command.
Shows if remote logging has been enabled via the logging trap command.
The facility type for remote logging of syslog messages as specified in the logging
facility command.
The severity threshold for syslog messages sent to a remote server as specified
in the logging trap command.
The address of syslog servers as specified in the logging host command.
394
User's Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P