Snmp-Server User - Planet SGSD-1022 User Manual

Row Status: active
Group Name: private
Security Model: v1
Read View: defaultview
Write View: defaultview
Notify View: none
Storage Type: volatile
Row Status: active
Group Name: private
Security Model: v2c
Read View: defaultview
Write View: defaultview
Notify View: none
Storage Type: volatile
Row Status: active
Console#
Field
groupname
security model
readview
writeview
notifyview
storage-type
Row Status

snmp-server user

This command adds a user to an SNMP group, restricting the user to a specific SNMP Read, Write, or Notify View. Use the no
form to remove a user from an SNMP group.
Syntax
snmp-server user username groupname [remote ip-address] {v1 | v2c | v3 [encrypted] [auth {md5 | sha} auth-password
[priv des56 priv-password]] no snmp-server user username {v1 | v2c | v3 | remote}
username - Name of user connecting to the SNMP agent.
(Range: 1-32 characters)\
Description
Name of an SNMP group.
The SNMP version.
The associated read view.
The associated write view.
The associated notify view.
The storage type for this entry.
The row status of this entry.
420
User's Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P