Snmp Agent Status - Planet SGSD-1022 User Manual

v3 AuthPriv
The predefined default groups and view can be deleted from the system. You can then
define customized groups and views for the SNMP clients that require access.

4.3.1 SNMP Agent Status

Enable SNMP service for all management clients. (i.e., versions 1, 2c or 3).
The page includes the following fields:
Object
Snmp Agent Status
4.3.2 SNMP Configuration
Use this page to configure the community strings authorized for management access, and to specify the trap managers that will
receive SNMP notifications or trap messages.
4.3.2.1 SNMP Community
All community strings used for IP Trap Managers should be listed in this table. Up to five community strings may be entered. For
security reasons, you should consider removing the default strings.
user defined user defined
Figure 4-3-1 SNMP Agent Status page screenshot
Description
Enable / Disable SNMP on the Managed Switch
User's Manual of SGSD-1022 / SGSD-1022P
user defined user defined
97
SGSW-2840 / SGSW-2840P
Provides user
authentication via MD5
or SHA algorithms and
data privacy using DES
56-bit encryption