Snmpv3 Remote Users - Planet SGSD-1022 User Manual

Once the new SNMPv3 user be successed add and be assign to a snmp group, this entry will shows in the users table.

4.3.3.4 SNMPv3 Remote Users

Each SNMPv3 user is defined by a unique name. Users must be configured with a specific security level and assigned to a
group. The SNMPv3 group restricts users to a specific read, write, and notify view.
To send inform messages to a SNMPv3 user on a remote device, you must first specify the engine identifier for the SNMP agent
on the remote device where the user resides. The remote engine ID is used to compute the security digest for authenticating
and encrypting packets sent to a user on the remote host. (See
a Remote Engine ID".)
1. Click SNMP, SNMPv3, Remote Users.
2. Click New to configure a user name.
3. In the New User page, define a name and assign it to a group, then click Add to save the configuration and return to the
User Name list.
4. To delete a user, check the box next to the user name, then click Delete.
Figure 4-3-9 SNMPv3 Users page screenshot
Figure 4-3-10 SNMPv3 Remote Users page screenshot
User's Manual of SGSD-1022 / SGSD-1022P
"Specifying Trap Managers and Trap
106
SGSW-2840 / SGSW-2840P
Types" and "Specifying