4.4.5.2 Output Rate Limit Port Configuration
Use the rate limit configuration pages to apply output rate limiting.
3.
Click Port, Rate Limit, Output Port Configuration.
4.
Enable the Rate Limit Status for the required interfaces, set the Rate Limit Scale and Rate Limit Level, and click Apply.
The page includes the following fields:
Object
Port/Trunk
Output Rate Limit
Status
Output Rate Limit
Scale/Level
Rate Limit Scale and 5 under Rate Limit Level.
Figure 4-4-9 Output Rate Limit Port Configuration page screenshot
Description
Displays the port/trunk number
Enables or disables the rate limit.
(Default: Enabled)
Multiplied by one another, the scale and level set the rate limit.
For example, to limit port traffic to 500K bytes per second, choose 100K under
Rate Limit Scale and 5 under Rate Limit Level.
User's Manual of SGSD-1022 / SGSD-1022P
123
SGSW-2840 / SGSW-2840P