Network-Access Mode - Planet SGSD-1022 User Manual

Layer 2 managed switches
Hide thumbs Also See for SGSD-1022:
Table of Contents

Advertisement

network-access
max-mac-count
mac-authentication
intrusion-action
mac-authentication
max-mac-count
network-access dynamic-vlan
network-access guest-vlan
mac-authentication reauth-time
clear network-access
show network-access
show network-access
mac-address-table

network-access mode

Use this command to enable network access authentication on a port. Use the no form of this command to disable network
access authentication.
Syntax
[no] network-access mode mac-authentication
Default Setting
Disabled
Command Mode
Interface Configuration
Command Usage
When enabled on a port, the authentication process sends a Password Authentication Protocol (PAP) request to a
configured RADIUS server. The username and password are both equal to the MAC address being authenticated.
On the RADIUS server, PAP usernames and passwords must be configured in the MAC address format
XX-XX-XX-XX-XX-XX (all in upper case).
Authenticated MAC addresses are stored as dynamic entries in the switch secure MAC address table and are removed
when the aging time expires. The maximum number of secure MAC addresses supported for the switch system is 1024.
Configured static MAC addresses are added to the secure address table when seen on a switch port. Static addresses are
treated as authenticated without sending a request to a RADIUS server.
MAC authentication, 802.1X, and port security cannot be configured together on the same port. Only one security
mechanism can be applied.
MAC authentication cannot be configured on trunk ports.
When port status changes to down, all MAC addresses are cleared from the secure MAC address table. Static VLAN
Sets a maximum for authenticated MAC addresses on an
interface
Determines the port response when a connected host fails MAC
authentication.
Sets a maximum for mac-authentication autenticated MAC
addresses on an interface
Enables dynamic VLAN assignment from a RADIUS server
Specifies the guest VLAN
Sets the time period after which a connected MACaddress must
be re-authenticated
Clears authenticated MAC addresses from the address table
Displays the MAC authentication settings for port interfaces
Displays information for entries in the secure MAC address
table
Table 5-42 Network Access
473
User's Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P
IC
IC
IC
IC
IC
GC
PE
PE
PE

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sgsw-2840Sgsd-1022pSgsw-2840pSgsw-2840rSgsw-2840p4

Table of Contents