Web-Auth Re-Authenticate (Port) - Planet SGSD-1022 User Manual

Example
Console(config-if)#web-auth
Console(config-if)#

web-auth re-authenticate (Port)

This command ends all web authentication sessions connected to the port and forces the users to re-authenticate.
Syntax
web-auth re-authenticate interface interface
interface - Specifies a port interface.
ethernet unit/port
-unit - This is unit 1.
-port - Port number. (Range: 1-28)
Default Setting
None
Command Mode
Privileged Exec
Example
Console#web-auth re-authenticate interface ethernet 1/2
Console#
web-auth re-authenticate (IP)
This command ends the web authentication session associated with the designated IP address and forces the user to
re-authenticate.
Syntax
web-auth re-authenticate interface interface ip
interface - Specifies a port interface.
ethernet unit/port
-unit - This is unit 1.
-port - Port number. (Range: 1-28)
ip - IPv4 formatted IP address.
Default Setting
None
Command Mode
User's Manual of SGSD-1022 / SGSD-1022P
483
SGSW-2840 / SGSW-2840P