Switchport Private-Vlan Isolated - Planet SGSD-1022 User Manual

switchport private-vlan isolated

Use this command to assign an interface to an isolated VLAN. Use the no form to remove this assignment.
Syntax
switchport private-vlan isolated isolated-vlan-id no switchport private-vlan isolated isolated-vlan-id - ID of isolated VLAN.
(Range: 1-4094).
Default Setting
None
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
Host ports assigned to a isolated VLAN cannot pass traffic between group members, and must communicate with
resources outside of the group via a promiscuous port.
Example
Console(config)#interface ethernet 1/3
Console(config-if)#switchport private-vlan isolated 3
Console(config-if)#
switchport private-vlan mapping
Use this command to map an interface to a primary VLAN. Use the no form to remove this mapping.
Syntax
switchport private-vlan mapping primary-vlan-id
no switchport private-vlan mapping
primary-vlan-id – ID of primary VLAN. (Range: 1-4094, no leading zeroes).
Default Setting
None
Command Mode
Interface Configuration (Ethernet, Port Channel)
Command Usage
Promiscuous ports assigned to a primary VLAN can communicate with any other promiscuous ports in the same VLAN,
and with the group members within any associated secondary VLANs.
Example
Console(config)#interface ethernet 1/2
Console(config-if)#switchport private-vlan mapping 2
Console(config-if)#
User's Manual of SGSD-1022 / SGSD-1022P
584
SGSW-2840 / SGSW-2840P