Table of Contents
Advertisement
1.
For security reason, please change and memorize the new username and password after this
first setup.
Username Max: 6, Min: 1 characters.
Password Max: 6, Min: 1 characters.
2.
Only accept command in lowercase letter under console interface.
5.2 Configure IP address
The Managed Switch is shipped with default IP address as following.
IP Address : 192.168.0.100
Subnet Mask : 255.255.255.0
To check the current IP address or modify a new IP address for the Switch, please use the procedures as follow:
Show the current IP address
1.
On "Switch# " prompt, enter "configure".
2.
On "Switch(config)# " prompt, enter "show ip".
3.
The screen displays the current IP address, Subnet Mask and Gateway. As show in
Figure 5-2-1: Show IP information Screenshot
142
User's Manual of WGSW-2620HP
Figure
5-2-1.
Advertisement
Table of Contents
