X Port Configuration - Planet SGSD-1022 User Manual

Object
802.1X System
Authentication Control

4.11.8.4 802.1X Port Configuration

When 802.1X is enabled, you need to configure the parameters for the authentication process that runs between the client and
the switch (i.e., authenticator), as well as the client identity lookup process that runs between the switch and authentication
server. These parameters are described in this section.
The page includes the following fields:
Object
Port
Status
Operation Mode
Max Count
Description
Sets the global setting for 802.1X.
(Default: Disabled)
Figure 4-11-21 Settings screenshot
Description
Port number.
Indicates if authentication is enabled or disabled on the port. (Default: Disabled)
Allows single or multiple hosts (clients) to connect to an 802.1X-authorized port.
Options:
Single-Host
Multi-Host
Default: Single-Host
The maximum number of hosts that can connect to a port when the Multi-Host
operation mode is selected.
Range: 1-1024;
284
User's Manual of SGSD-1022 / SGSD-1022P
SGSW-2840 / SGSW-2840P