Show Map Access-List Mac - Planet SGSD-1022 User Manual

[no] map access-list mac acl_name cos cos-queue acl_name – Name of the MAC ACL. (Maximum length: 16 characters)
cos-queue – Port CoS queue. (Range: 0-3)
Default Setting
None
Command Mode
Interface Configuration (Ethernet)
Command Usage
You must configure an ACL before you can map a CoS queue to the rule.
A packet matching a rule within the specified ACL is mapped to one of the output queues as shown below.
Example
Console(config)#interface ethernet 1/2
Console(config-if)#map access-list mac steve cos 0
Console(config-if)#
Related Commands
queue cos-map

show map access-list mac

show map access-list mac
This command shows the CoS value mapped to a MAC ACL for the current interface. (The CoS value determines the output
queue for packets matching an ACL rule.)
Syntax
show map access-list mac [interface] interface
• ethernet unit/port
-unit - This is unit 1.
-port - Port number.
Command Mode
Privileged Exec
Example
Priority 1,2
Queue 0
Table 4-50 Egress Queue Priority Mapping
User's Manual of SGSD-1022 / SGSD-1022P
0,3 4,5
1 2
509
SGSW-2840 / SGSW-2840P
6,7
3