Command Groups - Planet SGSD-1022 User Manual

5.3 Command Groups

The system commands can be broken down into the functional groups shown below.
Command Group
General
System Management
Simple Network
Management
Protocol
Authentication
Client Security
Access Control List
Interface
Link Aggregation
Mirror Port
Rate Limiting
Address Table
Spanning Tree
VLANs
Link Layer Discovery
Protocol
Class of Service
Description
Basic commands for entering privileged access mode, restarting thesystem, or quitting
the CLI
Display and setting of system information, basic modes of operation, maximum frame
size, file management, console port and telnet settings, system logs, SMTP alerts,
system clock, and switch clustering
Activates authentication failure traps; configures community accessstrings, and trap
receivers
Configures user names and passwords, logon access using local orremote
authentication (including AAA), management access through the web server, Telnet
server and Secure Shell; as well as port security, IEEE 802.1X port access control, and
restricted access based on specified IP addresses
Segregates traffic for clients attached to common data ports; and prevents unauthorized
access by configuring valid static or dynamicaddresses, and filtering DHCP requests
and replies
Provides filtering for IP frames (based on address, protocol, or TCP/UDP port number or
TCP control code) or non-IP frames (based onMAC address or Ethernet type)
Configures the connection parameters for all Ethernet ports,aggregated links, and
VLANs
Statically groups multiple ports into a single logical trunk; configures Link Aggregation
Control Protocol for port trunks
Mirrors data to another port for analysis without affecting the data passing through or the
performance of the monitored port
Controls the maximum rate for traffic transmitted or received on a port
Configures the address table for filtering specified addresses, displays current entries,
clears the table, or sets the aging time
Configures Spanning Tree settings for the switch
Configures VLAN settings, and defines port membership for VLAN groups; also enables
or configures private VLANs, protocol VLANs,and voice VLANs
Configures LLDP settings to enable information discovery aboutneighbor devices
Sets port priority for untagged frames, selects strict priority or weightedround robin,
relative weight for each priority queue, also sets priority for TCP/UDP traffic types, and
DSCP
User's Manual of SGSD-1022 / SGSD-1022P
348
SGSW-2840 / SGSW-2840P