Parity - Planet SGSD-1022 User Manual

form to restore the default value.
Syntax
databits {7 | 8} no databits
7 - Seven data bits per character.
8 - Eight data bits per character.
Default Setting
8 data bits per character
Command Mode
Line Configuration
Command Usage
The databits command can be used to mask the high bit on input from devices that generate 7 data bits with parity. If
parity is being generated, specify 7 data bits per character. If no parity is required, specify 8 data bits per character.
Example
To specify 7 data bits, enter this command:
Console(config-line)#databits 7
Console(config-line)#
Related Commands

parity

parity
This command defines the generation of a parity bit. Use the no form to restore the default setting.
Syntax
parity {none | even | odd}
no parity
none - No parity
even - Even parity
odd - Odd parit
Default Setting
No parity
Command Mode
Line Configuration
Command Usage
Communication protocols provided by devices such as terminals and modems often require a specific parity bit setting.
Example
To specify no parity, enter this command:
Console(config-line)#parity none
User's Manual of SGSD-1022 / SGSD-1022P
385
SGSW-2840 / SGSW-2840P